How to put a futon bunk bed together
How to put a futon bunk bed together is actually fairly easy. The first step is to figure out what size mattress you will need, if not you can always just buy a slightly larger one. Next, you’ll need some wooden slats that will attach to the end of each leg of the bed. These will be held in place with screws or magnets. Then you’ll need some slightly larger pieces of wood that will go across the bottom of the frame.
Follow these steps carefully and before you know it you’ll have your beautiful bed. If you are putting the mattress on a hardwood floor, you may want to use a special epoxy coating to protect the wood. If you are putting the mattress on the carpeting you can just lightly spray the covering with the cleaner and it should be good as new. Be sure and thoroughly dry the area after you clean it.
If you are looking at how to put a futon bunk bed together that is going to be used by two children read these instructions carefully. If you have a third child then be even more careful, but still follow the directions for the specific model you are buying. Once you have the frame and the mattress together follow the steps above again to put it all together.
If you are looking for how to put a futon bunk bed together that will be used by an older child read this article carefully. The most important part of that article is learning how to put the beds on a flat surface and how to use the slats that will attach to the end of each bed leg. If you don’t follow this process then you may find your children hurting themselves or worse yet their beds.
The final step in how to put a futon bunk bed together is to attach the bottom bunk bed legs to the frame. This is usually done through a set of hinges. You want to make sure that the hinges you use are screwed on securely. This will prevent the bed from falling down if it happens to be pushed over by a moving vehicle. If you are worried about your kids taking the beds on a moving truck then buy two folding beds instead.
So you can see that learning how to put a futon bunk bed together is not very difficult. The main thing you need to keep in mind is that you should start with a flat surface and then work your way up to a bed that is attached to a frame. Be sure to take careful measurements before you begin so that you have an accurate length measurement. You also want to be sure to assemble the frame pieces before putting them together. Then you can enjoy the benefits of a great sleep system for many years to come.